The steel product price list for this week reflects a slight increase compared to last month, with some fluctuations from the previous week. Below is a detailed breakdown of various steel products available in the market:
**General Line Steel:**
- Φ6.5mm Q235 Tongsteel: ¥5,420/ton
- Φ8mm Q235 Tongsteel: ¥5,420/ton
**High Line Steel:**
- Φ6.5–10mm Q235 Xilin: ¥5,480/ton
- Φ6.5–10mm Q235 Tongsteel: ¥5,480/ton
- Φ10mm Q235 Beitai: ¥5,480/ton
- Φ10mm Q235 Xinfu: ¥5,480/ton
**Rebar (HRB335):**
- Φ12–14mm Tongsteel: ¥5,450/ton
- Φ12–14mm Xilin: ¥5,450/ton
- Φ12–14mm Wu Steel: ¥5,450/ton
- Φ16–25mm Tongsteel: ¥5,370/ton
- Φ16–25mm Xilin: ¥5,370/ton
- Φ16–25mm Jianlong: ¥5,370/ton
**Rebar (HRB400):**
- Φ12mm Tonghua/Xilin: ¥5,620/ton
- Φ14mm Tongsteel/Silin: ¥5,620/ton
- Φ16–25mm Tongsteel/Silin: ¥5,450/ton
**Hot Rolled Coil:**
- 2.0mm*1050*C Q235 Angang: ¥5,800/ton
- 2.5mm*1050*C Q235 Angang: ¥5,700/ton
- 2.75mm*1050*C Q235 Angang: ¥5,700/ton
- 3.0mm*1250*C Q235 Angang: ¥5,700/ton
- 4.75mm*1500*C Q235 Angang: ¥5,550/ton
- 3.0mm*1250*C Q235 Bengang: ¥5,700/ton
- 5.5–7.5mm*1250*C Q235 Bengang: ¥5,550/ton
- 3.0mm*1250*C Q235 Tangshan Steel: ¥5,700/ton
- 5.5mm*1250*C Q235 Tang Steel: ¥5,550/ton
- 3.0mm*1250*C Q235 Tong Steel: ¥5,700/ton
**Cold Rolled Plate:**
- 1.0mm*1000*2000 Q195 Angang: ¥6,850/ton
- 2.0mm*1000*2000 Q195 Angang: ¥6,750/ton
- 2.5mm*1000*2000 Q195 Angang: ¥6,700/ton
- 3.0mm*1000*2000 Q195 Angang: ¥6,950/ton
- 2.0mm*1000*2500 Q195 Steel Cladding: ¥6,700/ton
- 1.0mm*1000*2000 Q195 Benxi Steel: ¥6,750/ton
**Medium Plate:**
- 8mm Q235 Sky Steel: ¥6,800/ton
- 10mm Q235 Puzhong Steel: ¥6,350/ton
- 16–25mm Q235 Sky Steel: ¥6,150/ton
**Low Alloy Plate:**
- 16–25mm Q345 Tian Steel: ¥6,300/ton
- 16–25mm Q345 Jinan Steel: ¥6,350/ton
- 16–25mm Q345 Angang: ¥6,350/ton
**Color and Galvanized Coil:**
- 0.426mm*1000*C SGCC Tianjin Xinyu: ¥7,400/ton
- 0.476mm*1000*C SGCC Tianjin Xinyu: ¥7,000/ton
- 0.5mm*1000*C SGCC Hengtong: ¥6,500/ton
- 1.0mm*1000*C ST02Z Bengang: ¥6,350/ton
**Welding Tube & Pipe:**
- 1 inch*3.25mm Q235 Birchwood: ¥5,550/ton
- 2 inch*3.5mm Q235 Birch Forest: ¥5,450/ton
- 3 inch*4.0mm Q235 Birch Forest: ¥5,430/ton
**I-beam & Channel:**
- 12# Q235 A-Steel: ¥5,100/ton
- 26# Q235 Angang: ¥5,480/ton
- 16# Q235 A-Steel: ¥4,970/ton
- 25# Q235 Laiwu Steel: ¥5,000/ton
**Angle Steel:**
- 50*5mm Q235 Tongsteel: ¥5,050/ton
- 100*10mm Q235 Steel: ¥5,100/ton
Overall, the steel market remains stable with minor variations in pricing based on material type and supplier. Prices are subject to change depending on demand and supply dynamics.
Filter Press Feeding Pump
MH slurry pump is single stage, cantilevered, horizontal, centrifugal High Pressure Slurry Pump. The MH High Head Slurry Pump is specifically designed to combat the need to run conventional design slurry pumps at excessive speeds to generate high heads and high efficiency often required in many modern slurry pumping applications used as the filter press feeding pump, SAG Mill Discharge Slurry Pump and Wet Crusher Slurry Pump etc.Single pump unit rather than series pumping can be adopted, at greatly reduced capital cost, while still offering optimum wear life and efficiency.
Pump Features
-High chrome alloy liners provide superior abrasion resistance & erosion resistance and maximum wear life
-Large diameter, high efficiency impellers designed to meet high head requirement, maximum wear life and low operating cost
-High head & high pressure
-Discharge branch can be positioned at intervals of 45 degrees
-The pump can be installed in multi-stage high pressure operation
-Easy to maintain
Application Range:
Discharge Size:1" to 6"
3 Capacity:16 to 1125 m /h
Head:12 to 95 m
Slurry Transfer Pump,Filter Press Feeding Pump,Discharge Slurry Transfer Pumps,Mill Dicharge Slurry Pump
SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com