Hi everyone,
This message comes from Drew Gresik. He just sent out some details and photos from the fire he responded to this morning.
So here's what happened: Drew showed up at 1433 South Kenneth around 50 minutes after the initial call came in. When he got there, it was already labeled as a Still and Box situation. After being on scene for about 10 minutes or so, 2-2-1 called for a full 2-11 alarm due to the intense fire spreading throughout the building. A bunch of commissioners were also present, including Commissioner Jose Santiago from 2-1-3. Since it was during shift change, there were a lot of firefighters scrambling to get geared up and move equipment around.
One thing that stood out was the abundance of spare vehicles at the scene. Companies like Towers 5 and 14, Trucks 26 and 36, along with another Engine and Truck, had backups on site. Tower 5 was using Engine 252, while Tower 14 was operating with Engine 248. Interestingly, Tower 5 parked in a vacant lot in Sector 4 and took over master stream operations for Tower 14. Squad 2’s Snorkel was also pressed into service as a master stream. Truck 26 was utilizing an E-ONE spare ladder truck, specifically Engine 279, which was positioned in the lot adjacent to the towers.
Drew shared several photos showing various pieces of equipment in action. There’s Engine 38 with its lines deployed, Engine 95 and Engine 113 both connected to hydrants, and Engine 117 also on a hydrant. Additionally, there are images of two spare E-ONE tower ladders actively working the blaze. One photo captures a handline being deployed to the third floor, while another shows Tower Ladder 54. There’s even a shot of one of the spare E-ONE tower ladders in action.
It sounds like it was quite a busy scene with lots of resources brought in to handle the situation. Drew mentioned that there were a lot of spare rigs available, which is always good to have when dealing with major fires.
Hope you all find these updates and photos informative! Let me know if you need anything else.
Best,
[Your Name]
All the communication boards under this classification are applicable to all series of electronic jacquard machines.. Electronic Jacquard Communication Board,multi loop control and CRC checkout ensure the data is accurate and correct. Industrial single chip MCU, high reliability, high durability. The anti-interference ability of dedicated data link transmission and differential transmission is better. According to the configuration of user,connect Ethernet and internet for remote control and upgrade.
Jacquard Machine Control Embedded Jacquard Control Panel
JIANGSU S&S INTELLIGENT SCIENCE AND TECHNOLOGY CO., LTD , https://www.ssjacquard.com