Xenon lamp aging test chamber adopts electromagnetic expansion method as equipment energy-saving design and imported special human-machine interface temperature and humidity controller. It is more and more connected to emerging technologies, reliable performance, simple operation, control technology, etc. to catch up with the current level, cost-effective The same type of imported test equipment is the ideal equipment for conducting full-light spectrum test.
For an increasingly better xenon lamp aging test chamber, the efficiency of the refrigeration system is even higher. Therefore, for the core components of the refrigeration system, the probability of failure and the frequency of failures are greatly reduced. But once the test chamber compressor fails, it will be a fatal failure for the equipment. Therefore, we should pay enough attention to the fault of the compressor, and we must strictly follow the following inspection steps and solutions:
First, check the steps:
1. Please check the location of the equipment, if there is more than 30 cm away from the wall;
2. Is it a confined space in four weeks?
Second, the solution:
1. If not, please keep the position of the machine more than 30 centimeters around, because the poor heat dissipation will cause the running current of the compressor to rise, resulting in overcurrent protector action;
2. If the space is surrounded by confined space, it will cause the environment to have a temperature rise, and it will cause the compressor's operating current to rise, resulting in an over-current protector (heat-reserve power). Therefore, keep the air around;
3. After the above problems are solved, please install the over-current protector under the three electromagnetic switches in the computer room. Press the reset button to the next step. If you hear a click, it means that the one that was in control of the compressor was overloaded. However, this time it has returned. At this time, please transfer the current setting value to 1.25 times the rated current of the compressor.
As long as the compressor is not a serious, irreversible failure, it requires parts replacement and maintenance. I believe that as long as we follow the above inspection steps and solutions, ordinary compressor abnormalities will be solved and we will also have a normal xenon lamp aging test box.
Meticulous division of labour, consecutive processes, professional of manufacture and high standard equipment ensure the high quality of the machine.
Factory introduced high precision maching tools, with the equipment of cutting machine tools, heattreating facilities, check out test sets and painting facilities, the processing ability for middle and large size machine, reach a high level in plastic industry while the quality if the machine is ensured at the same time.
The large size machine can produce different design of chairs.
Vertification of many year's market application, optimal combination configuration, stable, reliable and durable system with the characteristics of high efficiency, energy saving, low voice and strong power.
The strengthening design of template is carried out through multiple times of optimization design of major components such as template, based on the analysis of finite element software, which both guarantee the lifetime of template and protected mould.
High rigid template adopts the structure with coexistence of installation screw hole and T-shaped groove.
The tie rod of each machine model has passed the test by professional testing organization, which means that, the deflection of tie rod is within reasonable scope while guaranteeing the operation of machine.
Plastic Chairs Making Machines
Plastic Chairs Making Machines,Chair Making Injection Molding,Plastic Chair Making Machine,Safety Chair Molding Machine
Ningbo Tongyong Plastic Machinery Manufacturering Co. Ltd. , https://www.tongyongmachinery.com