Every LED advertising vehicle driver in the process of driving, how many times it will inevitably appear several times violation tickets, just got a driver's license for new driver violations are also commonplace, because of hand-born and tense reasons accidentally Was photographed. In fact, as long as the rookie LED advertising vehicle driver is honest and regular driving, a lot of signs and road signs observed on the road, not speeding can not be reduced, you can reduce the number of eating tickets.
1. The Rookie LED advertising vehicle driver cannot stop on the diversion line because the diversion line is used to drive the vehicle at the intersection must be driven in accordance with the relevant provisions of the route, can not have super-line and pressure line Driving behavior. Some rookie LED advertising car drivers think that the upper part of the guide line is able to stop, which will result in illegal situations.
2. The LED advertising vehicle cannot stop the vehicle on the dedicated lane. There is no obvious awareness in the special road segment of some cities. When the rookie LED advertising vehicle driver does not see the sign and the bus lane, there is no bus. At that time, the wingman immediately turned the vehicle over. Do not feel that this road is not congested with traffic jams. It is very likely that he has already been photographed in the moment of turning.
3. The LED advertising vehicle driver cannot stop the vehicle on the curb line. In fact, the yellow solid line is painted on the tension of the vehicle parked on the above, but a lot of rookie drivers did not understand the yellow solid line in the end mean, once stopped, you have to eat a ticket.
4. When the LED advertising vehicle is driving on the highway, if there is no more urgent situation, the LED advertising vehicle cannot be parked on the emergency lane. When the vehicle has a fault or a traffic accident occurs, the vehicle can be parked in the emergency lane waiting for rescue. Some vehicles, such as ambulances, fire engines, and police vehicles, can also be temporarily parked in emergency lanes when they perform emergency duties.
Heavy Duty Precision Live Center, High Speed Heavy Duty Precision Live Center , Precision Lathe Heavy Duty Live Center, High Speed Live Center, Light Duty Live Center, machine tool parts in machining. Tail with a taper shank, installed in the machine tool spindle taper or tailstock shaft hole, with its head against the workpiece cone. Can be used to face the complex parts and do not allow the central hole of the supporting parts. The top is mainly composed of a thimble, a clamping device, a shell, a fixed pin, a bearing and a core shaft. Thimble is the top of the inner hole of the center hole or pipe material, on the other end can be top end is a spherical or conical parts, thimble by the clamping device fixed. When the parts are not allowed or can not hit the central hole, the use of the clamping device to clamp the turning. The shell and the core shaft drill with pin hole, removing of the fixed pin pin or, to achieve the top two. Top can also be used for the work of the drilling, casing and hinge hole.
We are specializing in the production of Live Cente, we can to figure to sample processing, and perfect after-sales service and technical support. Looking forward to your cooperation!
Heavy Duty Precision Live Center
Cnc Live Center,Lathe Heavy Duty Live Center ,Heavy Duty Live Center,Heavy Duty Precision Live Center
JINING QINFENG MACHINERY HARDWARE CO.,LTD , https://www.qftoolholder.com