Waste Oil Distillation & Converting System - Series BOD
**Key Features:**
- **Economically Advantageous:** Regenerated oil costs less than 80% of new oil, sometimes as low as 50%. No downtime required during oil reclamation.
- **Strategic Asset Control:** Retain control over your oil assets and reduce dependency on external suppliers.
- **Extended Equipment Life:** In-situ treatment helps maintain the health of transformers and other critical equipment.
**Product Description:**
With the rapid development of industries dealing with waste plastics, rubber, and oils, fuel oils produced from these sources are increasingly used across various sectors. However, rising raw material costs pose a challenge. The most effective way to increase the value of fuel oil while keeping costs low is to refine crude oil from waste materials. This refined oil can match diesel standards in quality. Traditional methods include large-scale refining units (costing over $1 billion) or earth furnaces (less efficient and unsafe).
Our **Series BOD Waste Oil Distillation & Converting System** offers an innovative solution that is both cost-effective and environmentally friendly. It allows for the conversion of black oily waste into base oil, diesel, and gasoline through catalytic distillation.
**Operation Process:**
1. Pre-treat the oil and pump it into the heater vessel.
2. Heat the oil up to around 430°C.
3. Perform distillation and catalytic processes.
4. Collect base oil, diesel, and gasoline.
5. After the reaction completes, remove residues and prepare for the next cycle.
**Main Advantages:**
1. Easy to operate—only 1–2 workers needed.
2. Environmentally safe—no smoke, odor, or harmful emissions.
3. Can process various types of dirty oil, including engine oil, lube oil, and waste plastic/rubber oil.
4. High-quality output with no discoloration or bad smell.
5. Low operational cost:
- Catalyst cost: < $30 per ton of waste oil.
- Heat energy: ~105 kcal per ton.
- Power consumption: ~40 kW per ton.
6. Fully automated with advanced design.
7. Uses water circulation cooling for safety and efficiency.
8. No acid or clay used, which are banned in many countries.
9. Supports multiple heating sources such as natural gas, furnace oil, and coal.
**Technical Specifications:**
| ITEM | MODEL UNIT | BOD-5 | BOD-10 | BOD-15 | BOD-20 | BOD-30 |
|------|------------|-------|--------|--------|--------|--------|
| Capacity | Tons/day | 3 | 5 | 10 | 15 | 30 |
| Recovery Rate | % | 88~98 | 88~98 | 88~98 | 88~98 | 88~98 |
| Working Pressure | MPa | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 |
| Temperature Range | °C | 80~430 | 80~430 | 80~430 | 80~430 | 80~430 |
| Working Noise | dB(A) | ≤85 | ≤85 | ≤85 | ≤85 | ≤85 |
| Power Supply | | 380V/3 Phase/50Hz | 380V/3 Phase/50Hz | 380V/3 Phase/50Hz | 380V/3 Phase/50Hz | 380V/3 Phase/50Hz |
| Electrical Power | kW | 18 | 20 | 24 | 28 | 30 |
| Cooling Method | | Water Circulation | Water Circulation | Water Circulation | Water Circulation | Water Circulation |
| Heating Energy Source | | Natural Gas, Fuel Oil, Coal | Natural Gas, Fuel Oil, Coal | Natural Gas, Fuel Oil, Coal | Natural Gas, Fuel Oil, Coal | Natural Gas, Fuel Oil, Coal |
| Weight | Tons | 6 | 8.5 | 16 | 29 | 37 |
| Manufacturing Time | Days | 25 | 30 | 35 | 35 | 45 |
**Recovery Rate:**
- Base Oil: 85%~88% (similar to SN150~SN200)
- Gasoline: ~3%
- Diesel: ~3%~4%
- Oil Residue: 6%~8%
**Technical Index of Oil After Treatment:**
| No | Category | Unit | Light Base Oil | Medium/Heavy Base Oil |
|----|----------|------|----------------|------------------------|
| 1 | Viscosity (40°C) | mm²/s | 16~32 | 28~72 |
| 2 | Density Index | | ≥99 | 110 |
| 3 | Appearance | | Transparent | Transparent |
| 4 | Color | ASTMD1500 | ≤1 | ≤2 |
| 5 | Pour Point | °C | -15 | -10 |
| 6 | Water Content | %W/W | ≤0.05 | ≤0.05 |
| 7 | Flash Point (Open) | °C | ≥180 | ≥210 |
| 8 | Ash Content | %W/W | 0.005 | 0.005 |
| 9 | Carbon Residue | %W/W | ≤0.13 | ≤0.13 |
| 10 | Corrosion Copper, 100°C 3h | | Qualified | Qualified |
| 11 | Acidity | mgKOH/g | ≤0.05 | ≤0.05 |
**Customization Options:**
- Enclosed Type
- Trailer Type
- PLC (Programmable Logic Controller)
For more information, contact us via email or visit our website: [www.zhongnengcq.cn](http://www.zhongnengcq.cn)
Keywords: oil filtration, oil purification, oil treatment, oil purifier, oil recycling, oil processing, oil filtering, energy saving, oil regeneration, oil processor, oil filter, oil process, oil purify, oil regenerating, oil restoration, waste oil disposal, oil reclaimed, oil reclaiming, waste oil management, oil regenerate, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recondition, oil filters, oil refinery, oil refiner, oil cleaning, oil recycle, oil reclaiming, oil separator, oil recovery, oil recycler, oil reclamation, oil separation, oil purifiers, oil recondition.
**Key Features:**
- **Economically Advantageous:** Regenerated oil costs less than 80% of new oil, sometimes as low as 50%. No downtime required during oil reclamation.
- **Strategic Asset Control:** Retain control over your oil assets and reduce dependency on external suppliers.
- **Extended Equipment Life:** In-situ treatment helps maintain the health of transformers and other critical equipment.
**Product Description:**
With the rapid development of industries dealing with waste plastics, rubber, and oils, fuel oils produced from these sources are increasingly used across various sectors. However, rising raw material costs pose a challenge. The most effective way to increase the value of fuel oil while keeping costs low is to refine crude oil from waste materials. This refined oil can match diesel standards in quality. Traditional methods include large-scale refining units (costing over $1 billion) or earth furnaces (less efficient and unsafe).
Our **Series BOD Waste Oil Distillation & Converting System** offers an innovative solution that is both cost-effective and environmentally friendly. It allows for the conversion of black oily waste into base oil, diesel, and gasoline through catalytic distillation.
**Operation Process:**
1. Pre-treat the oil and pump it into the heater vessel.
2. Heat the oil up to around 430°C.
3. Perform distillation and catalytic processes.
4. Collect base oil, diesel, and gasoline.
5. After the reaction completes, remove residues and prepare for the next cycle.
**Main Advantages:**
1. Easy to operate—only 1–2 workers needed.
2. Environmentally safe—no smoke, odor, or harmful emissions.
3. Can process various types of dirty oil, including engine oil, lube oil, and waste plastic/rubber oil.
4. High-quality output with no discoloration or bad smell.
5. Low operational cost:
- Catalyst cost: < $30 per ton of waste oil.
- Heat energy: ~105 kcal per ton.
- Power consumption: ~40 kW per ton.
6. Fully automated with advanced design.
7. Uses water circulation cooling for safety and efficiency.
8. No acid or clay used, which are banned in many countries.
9. Supports multiple heating sources such as natural gas, furnace oil, and coal.
**Technical Specifications:**
| ITEM | MODEL UNIT | BOD-5 | BOD-10 | BOD-15 | BOD-20 | BOD-30 |
|------|------------|-------|--------|--------|--------|--------|
| Capacity | Tons/day | 3 | 5 | 10 | 15 | 30 |
| Recovery Rate | % | 88~98 | 88~98 | 88~98 | 88~98 | 88~98 |
| Working Pressure | MPa | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 |
| Temperature Range | °C | 80~430 | 80~430 | 80~430 | 80~430 | 80~430 |
| Working Noise | dB(A) | ≤85 | ≤85 | ≤85 | ≤85 | ≤85 |
| Power Supply | | 380V/3 Phase/50Hz | 380V/3 Phase/50Hz | 380V/3 Phase/50Hz | 380V/3 Phase/50Hz | 380V/3 Phase/50Hz |
| Electrical Power | kW | 18 | 20 | 24 | 28 | 30 |
| Cooling Method | | Water Circulation | Water Circulation | Water Circulation | Water Circulation | Water Circulation |
| Heating Energy Source | | Natural Gas, Fuel Oil, Coal | Natural Gas, Fuel Oil, Coal | Natural Gas, Fuel Oil, Coal | Natural Gas, Fuel Oil, Coal | Natural Gas, Fuel Oil, Coal |
| Weight | Tons | 6 | 8.5 | 16 | 29 | 37 |
| Manufacturing Time | Days | 25 | 30 | 35 | 35 | 45 |
**Recovery Rate:**
- Base Oil: 85%~88% (similar to SN150~SN200)
- Gasoline: ~3%
- Diesel: ~3%~4%
- Oil Residue: 6%~8%
**Technical Index of Oil After Treatment:**
| No | Category | Unit | Light Base Oil | Medium/Heavy Base Oil |
|----|----------|------|----------------|------------------------|
| 1 | Viscosity (40°C) | mm²/s | 16~32 | 28~72 |
| 2 | Density Index | | ≥99 | 110 |
| 3 | Appearance | | Transparent | Transparent |
| 4 | Color | ASTMD1500 | ≤1 | ≤2 |
| 5 | Pour Point | °C | -15 | -10 |
| 6 | Water Content | %W/W | ≤0.05 | ≤0.05 |
| 7 | Flash Point (Open) | °C | ≥180 | ≥210 |
| 8 | Ash Content | %W/W | 0.005 | 0.005 |
| 9 | Carbon Residue | %W/W | ≤0.13 | ≤0.13 |
| 10 | Corrosion Copper, 100°C 3h | | Qualified | Qualified |
| 11 | Acidity | mgKOH/g | ≤0.05 | ≤0.05 |
**Customization Options:**
- Enclosed Type
- Trailer Type
- PLC (Programmable Logic Controller)
For more information, contact us via email or visit our website: [www.zhongnengcq.cn](http://www.zhongnengcq.cn)
Keywords: oil filtration, oil purification, oil treatment, oil purifier, oil recycling, oil processing, oil filtering, energy saving, oil regeneration, oil processor, oil filter, oil process, oil purify, oil regenerating, oil restoration, waste oil disposal, oil reclaimed, oil reclaiming, waste oil management, oil regenerate, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recondition, oil filters, oil refinery, oil refiner, oil cleaning, oil recycle, oil reclaiming, oil separator, oil recovery, oil recycler, oil reclamation, oil separation, oil purifiers, oil recondition.micro 100 boring bar,micro boring bar,indexable boring bar,solid carbide boring bars,boring bar holder,boring head for milling machine,boring bar set
SICHUAN JOJO TOOLS CO., LTD , https://www.jojo-tools.com