Low Air Pressure Test Climatic Altitude Equipment
**Application:**
As you know, the purpose of this testing is to simulate the environmental conditions inside a cargo aircraft when transporting your cosmetics during high-altitude flights. This includes the period from takeoff, leaving the ground, and climbing up to the stratosphere for long-distance cruising.
During this process, there are two key factors to consider: the minimum cold temperature experienced at high altitudes and the rate at which the internal temperature changes as the aircraft climbs. Due to the limitations of our professional knowledge in this specific field, we are unable to determine how fast the aircraft ascends per minute. Therefore, we also can't be certain about the exact temperature change rate inside the cabin. However, as experts in scientific research for such testing, we believe you will be able to find these answers. If so, it would greatly benefit both parties to assess the feasibility of the proposed solution.
**Detailed Technical Specifications:**
| Product Model | YCTL-150 |
|--------------|-----------|
| Power | 3-phase AC 380V, 50Hz, max 6KW |
| Inner Chamber Size (W x H x D) | 500 x 600 x 500 mm |
| Exterior Chamber Size (W x H x D) | 1210 x 1600 x 1250 mm |
| Temperature Range | -70°C to +155°C |
| Temperature Fluctuation | ±0.2°C (at atmospheric pressure) |
| Indication Resolution | 0.01°C |
| Temperature Uniformity | ±2°C |
| Heat Up Time | 3°C/min |
| Pressure Range | 600mmHg to 1mmHg |
| Pressure Accuracy | ±0.1kPa (<2kPa), ±5% (2kPa~40kPa), ±2kPa (>40kPa) |
| Depressurization Time to 1mmHg (25°C ±10°C) | 30 minutes |
| Insulation | Glass wool & PUF |
| Perspiration Resistant | K-type tube |
| Chamber Materials | SUS#304 stainless steel for internal chamber; galvanized steel with ivory white powder coating for external chamber |
**Accessories:**
1. Temperature-resistant silicone gasket – 1 piece
2. Cable port – 1 piece (Φ100mm)
3. Window light – 1 piece
4. Multi-pane vacuum glass window – 1 piece
**Refrigeration & Heating System:**
1. Original imported high-efficiency compressor
2. Air-cooled condenser
3. Fin-tube heater
4. Original imported solenoid valves
5. Inner spiral K-type refrigerant copper tube
6. U-type finned electric thermal tube
7. Separate heating and cooling systems
8. Refrigeration system
**Circulating & Drain System:**
1. Centrifugal fan with imported motor
2. Reverse uniflow (airflow direction)
3. Flow-throws wind
4. Drain system uses swirl-type outlet and U-type deposition unit
**Programmable Micro-Computer LCD Touch Controller:**
1. User-friendly, stable, and easy-to-use controller
2. Programs: Edit up to 32 PTNs (800 steps per pattern), each PTN can be executed 999 times
3. PID and SSR control method, stable and user-friendly
4. Korea TIME 1500 controller
More detailed information will be included in the quotation sheet and technical specification.
If you have any questions or need further assistance, please feel free to contact Ms. Vickey Huang directly. We look forward to serving you and providing the best possible support.
Thank you in advance!
Ms. Vickey Huang
filter,equipment,partition
ChangZhou FENGJU Machinery Equipment CO., LTD , https://www.fengjumachinery.com