Garbage rider brake tips
Our users should know that garbage handbrake is very important, and do not take it lightly. The following is the skill that our sales department manager Su got in the technical department. It responds to the users of garbage trucks that are getting more and more. How to correctly use the handbrake of the garbage truck in the process, then the following content is detailed for everyone to do, and the suction can bring more technical help to everyone.
As an important part of braking, the use rate of the handbrake system is very high during the process of our car use. As the vehicle usage time increases, the handbrake's performance will decrease with the increase in the number of uses. The owner thinks that the brake has been pulled, but in fact the accident occurs because the handbrake is invalid or the position of the handbrake has not reached its working point. Therefore, the performance of the handbrake needs to be checked regularly.
At present, in the vast majority of cars and light vehicles we have come into contact with, their hand brake systems are all acting on the rear wheels. Because of the different types of rear-wheel brakes, the handbrake has two working environments: On the rear wheel where the drum brake is installed, the drum brake itself can double as the parking brake. Therefore, the brake drum inside the brake drum during parking Engage with friction plates so that braking force can be generated. In the rear wheel where the disc brake is mounted, since there is no brake drum, an additional parking brake drum must be installed at the center of the brake disc to complete the braking work of the handbrake.
In addition, whether it is the speed of the garbage truck driving fast or slow, as a professional driver should properly operate the handbrake, can not blindly operate!
Concrete Pile Spinning Machine
Concrete Pile Spinning/Centrifugal Machine:
Concrete Pile Spinning/Centrifugal Machine is mainly apply to produce High strength centrifugal technology concrete spun piles of difference diameter and length, Prestressed Reinforced concrete pole(SPC pole) by spinning formed. According to customer's effeciency request, there are Single wheel spinning machine and Double wheel spinning machine at customer's option, it is equipped with a stepless speed-variation motor and a control panel, it works smoothly and its speeder is of wide-range. Its box base is sturdy and durable and easy for installation.
Our Pile Spinning Machine's Advantages:
1. Unique "slot" design, change the screw limit between the bearing support and the base plate with the card slot and bolt limit. Both up and down sides of the spinning machine panel, undersurface and two sides of bearing support go through fine machining. Though the process is complex, it makes it more solid during high-frequency vibration of bearing support and the floor. Repair and replacement also have interchangeability.
2. Connection shaft is whole shaft, to avoid stress concentration brought by shaft diameter changes, resulting in the phenomenon of "shaft-broken".
3. The limit side of the support wheel is removable. It is convenient for users to replace.
4. Frequency-conversion cabinet of spinning machine records process parameter of each pipe and output reports, provides the office computer data communication interface.
Spinning Machine Technical Parameter:
|
Wheel Distance(mm) |
2000 |
|
Central wheel Distance(mm) |
950-1200 |
|
Wheel Diameteri(mm) |
600 |
|
Axle Diameter(mm) |
110-125 |
|
Automatic controller for centrifugal concrete pile machine |
|
We can Customize for you. If you have any questions, please contact with us. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Concrete Spinning Machine,Spun Pile Centrifugal Machine,Concrete Pile Spinning Machine,Pole Spinning Machine
Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , https://www.jshaiheng.com