One-way valve. The valve fault is: the valve can not be commutated or reversing action is slow, gas leakage, electromagnetic pilot valve failure. (1) Check valve: The reversing valve can not change direction or change slowly, usually due to poor lubrication, spring stuck or damaged, oil or impurities stuck in sliding parts and other causes. In this regard, should first check the work of the oil mist is normal; the viscosity of the lubricant is appropriate. If necessary, lubricate, clean the sliding part of the reversing valve or replace the spring and reversing valve. (2) check valve.When the reversing valve is used for a long period of time, the sealing ring of the valve core is prone to be worn, the valve rod and the valve seat are damaged, leading to gas leakage in the valve, slow or improper valve operation, and other faults. At this point, the seals, stem and seat should be replaced or the reversing valve replaced. (3) If the electromagnetic pilot valve into the vent hole is clogged with debris and other debris, closed laxity, the activities of the core is stuck, the circuit is faulty, etc., can lead to the reversing valve can not be reversed. For the first 3 cases, clean the sludge and impurities on the pilot valve and movable iron core. The circuit failure is generally divided into two types of control circuit failure and electromagnetic coil failure. Before checking the circuit fault, the manual knob of the reversing valve should be rotated a few times to see if the reversing valve can be normally commutated under the rated pressure. If the commutation is normal, the circuit is faulty. Check, the instrument can measure the voltage of the solenoid to see if it has reached the rated voltage, if the voltage is too low, you should further check the control circuit power and the associated trip switch circuit. If the reversing valve can not be changed normally under the rated voltage, check whether the electromagnetic coil connector (plug) is loose or inaccurate. Method is, unplug the plug, measuring the resistance of the coil, if the resistance is too large or too small, indicating that the electromagnetic coil is damaged, should be replaced.
Our company manufactures many kinds of digital materials, including Water-based backlit Film(back print),Water-based backlit Film(front print),Eco-solvent Backlit Film(front print),Inkjet semi-transparent Inkjet Film, Clear Frosted Inkjet film, Clear Glossy Inkjet Film, Eco-solvent Clear Film, Window Glass Film,Laser Film and so on.We specialized in manufacturing printing media and have the professional experience and we occupy the Chinese domestic market over 50% share.
PET Film Material,pet film material images,polyester pet film materials
Guangzhou Quanxu Technology Co Ltd , https://www.skyelecteflonheater.com