Recently, on the website of the Ministry of Industry and Information Technology, we discovered a low-profile slab semi-trailer with a length of 13.75 meters and a width of 3 meters.
This low-profile semi-trailer also has multiple lengths and widths to choose from. Although the maximum tire can only be installed 8.28R20 or 8.25-20 tires, but the trailer's total mass has reached 40 tons.
It can be said that this low-profile semi-trailer is the successor of the previous 17.5-meter slab. In the announcement, we clearly saw that this low-profile semi-trailer can only transport non-detachable objects such as transport excavators, loaders, and pile drivers. Such as large-scale equipment, that is to say, this low-profile semi-trailer can not be shipped according to regulations.
According to Liangshan trailer sales personnel, this 3-meter wide low-profile semi-trailer has been put into operation. This 13.75-meter-long, 3-meter wide low-profile semi-trailer is estimated to be bought by many people for general cargo transportation.
For the most part, this 3-meter wide low-profile semi-trailer is about 37 square meters more than a 13-meter warehouse bar. If you transport a piece of cargo, you can pull more than 30 pieces of goods.
Postscript:
The 17.5m slab was born at the beginning of the year to transport undismantlable objects, but afterwards we all pulled up the general cargo. It is estimated that this low-profile semi-trailer with a length of 13.5 meters and a width of 3 meters will be the same. Some people may say that using this vehicle to pull stocks is not a loophole? In the existing transportation environment, in addition to the mandatory requirements of the national laws and regulations, we need more self-discipline in our industry, as long as such a transportation industry can develop in a healthy and healthy manner.
We have got 220kV Transmission Line Substation Structure Quality Certificate from Power Industry Steel Tower Qualified Inspection & Test Center from 2001 year. Our products are made from quality sheet through bending, forming, automatic welding and hot galvanization. We can reach one-run machining length of 14m and can bend sheet of thickness up to 45mm. We adopt advanced welding procedures, automatically weld main joints and reach rank-II welding quality.
Substation Structure, Substation Steel Structure, Steel Tubular Substation Structures, Steel Structure For Substation
Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.steel-pole.com