Capital Airport Test Drives Car Rental for 5 Persons in 10 Minutes

In June this year, the Capital Airport carried out a questionnaire on the “Taxi Capital Airport Intention Survey” on the official website. The results showed that more than 70% of respondents were willing to share a taxi with others. Recently, in order to ease the situation of waiting queues, the taxi cooperative software was tested in the T3 terminal. From 8 to 12 pm, passengers can send the information through the software and leave the car. Last night, the reporter found out at the T3 terminal that in a 10-minute period, about 5 people attempted to use the software to scan the code, but they failed to make it. The software operator stated that the hybrid software was launched in mid-November and is currently in trial operation.

   ■ Experience

   The contact person's contact phone is digitally "replaced"

At 8:10 last night, on the B1 floor of the T3 terminal of the Capital Airport, multiple billboards were placed at the entrance, queuing area, information desk, etc., marking the time between 8 and 12 o'clock in the evening and taking the ride. Simple process.

At 8:15pm, the reporter used a mobile phone to scan the QR code to enter the "carpooling" page of the "Rainbow Car Pool". After entering the destination and mobile phone number as required, the page reads "You have successfully posted a message, waiting for the SMS notification."

After about 10 minutes, the reporter still did not receive a text message, and then scanned the code again to enter the web page and re-released the news of the ride. This time, about 1 minute waited, the reporter received a message with the number "1069" at the beginning, telling the person who had found the carpooler to contact the other party's connector and using the QR code to pass the gate. The airport expressway was paid by the passenger who first got off the bus. .

The reporter enters the web page according to the “connector” URL displayed in the text message. The page shows the first step of viewing the information of the carpooler. The page provides the destination, the carpool number, and the matching degree of the carpooler. After confirming the carpooler, the reporter pulls down the page and clicks on the "contact carpooler" button in the second step. However, when dialing the other party's phone number, the number displayed on the reporter’s mobile phone is not a mobile phone number, but a string of numbers beginning with “95013”.

At 8:35 last night, the reporter dialed out and showed no answer. In the end, the reporter failed to take the ride.

At the same time, on the first basement of the T3 terminal, two women are also looking for riders through the web version of the Rainbow Carpool. "I'm going to Jianguomen. The SMS reminds no one to give up the car with me. I can only give up," said passenger Ms. Liu.

Ms. Lee said that she had released the carpooling information to Wangjing. After about five minutes, the text message indicated that he had found a carpooler. "The other person called me and I didn't receive it. I called them again. They had already left the car." Ms. Li said that although the first attempt to take the ride was not successful, the rider saved money and saved time. She will also choose this method.

Last night, the reporter found out at the billboard next to the queuing area at the basement of the T3 terminal that, in about 10 minutes, dozens of passengers passed by in front of the billboard, and about 5 people attempted to use the software. No one succeeded in carpooling.

   Carpooling process

Scan the QR code on a billboard or download the Rainbow Carpool APP

Select the real-time release line, fill in the destination, telephone

The system automatically "pairs" with SMS or APP message notification

Contact with the passers-by in the joint area "joint", carpool left

   ■ Follow up

   The test run limit is 4 people

According to the staff of the hybrid operator "Rainbow Carpooling", the software has been providing services to passengers at Terminal T3 since mid-November and is still in the trial operation stage.

The staff member said that since the trial operation, the number of people who chose to combine and ride on Sunday evening, Friday afternoon and evening was higher. “We chose to provide services between 8 and 12 in the evening during the trial run, considering that there are more flights to Hong Kong at this time.” Staff said that after the joint-use software is officially put into use, the specific time for providing services will also be served by the airport. Notice.

For the choice of the passenger-cum-passenger, the staff member said that after the destinations of both parties are requested to enter the destination, the software will perform an operation on the back-end, and it will “pair” and recommend a reasonable route.

According to reports, passengers taking taxis from the airport are expected to have baggage, etc. The current maximum number of passengers is to support two groups of no more than four people.

   ■ Doubts

   Why is the first person to get off the bus to pay the high-speed fee?

A: There may be a detour on the way to send the first passenger back. This can't be balanced at present, and you can balance the way you paid the high-speed fee from the person who first got off, but you can also negotiate on your own.

   Will the two parties leave their mobile phone number to reveal privacy?

A: After determining the route, after both partners open the website link, they can get in touch with each other. To protect privacy, the call and caller ID are not actual numbers, but the hidden number beginning with 95013. The hidden number will be a few hours after the ride. Inside, it will automatically fail.

Tape Edge Machine

Automatic mattress tape edge machine is mainly used for mattress tape sewing. The main advance is
sewing head need not moving, but the lifting machine can turn angles to sew mattress
of different thickness. It is equipped with Singer-300U chain sewing head and
microcomputer controlling system imported from America. When producing, the
conveyer can move forward, backward, turning 90 degrees or 180 degrees to sew the
whole mattress automatically.


Semi automatic mattress tape edge machine its working table is adopted high-strength independent bearing, stable
working condition, motor upper and down the height of worktable. The rotary power supply
is assembled in the machine. It is equipped with Singer-300U chain sewing head and
microcomputer controlling system imported from America. It may change walking carriage`s
turning speed automatically, which make mattress sewing operation more convenient, fast
and the finished turn-flange more beautiful.

Tape Edge Machine,Mattress Tape Edge Machine,Mattress Tape Edge Sewing Machine,Automatic Mattress Tape Edge Machine

SOFTLIFE MATTRESS MACHINERY CO.,LTD , https://www.machinesoftlifefoam.com