Magnetic Metal Separating Machine Wet Permanent Drum Magnetic Separator

Product Introduction for magnetic drum separator
Series CTB wet drum permanent magnetic separator is usually used for sorting the fine-grained strong magnetic minerals, or removing strong magnetic minerals from non-magnetic minerals. With a deep magnetic field, the machine can make a continuous row of ore feeding and discharge. It also has enough working clearance and high processing capabilities.



Working principle of magnetic drum separator

When the ore pulp folw into the magnetic field, the strong magnetic minerals are adsorbed on the surface of the drum. The weak magnetic and non-magnetic minerals are cast off and discharged, while the strong magnetic minerals on the surface of the drum rotate with the drum and will be brought out of magnetic field to complete the sorting operation.

The drum can be equipped with three kinds of tanks. That is downstream tank (Series CTS), upstream tank (Series CTN) and half upstream tank (Series CTB).

The downstream tank (Series CTS) is applicable to rougher flotation and concentration of ore with size: 0~10mm.

The upstream tank (Series CTN) is applicable to rougher flotation and concentration of ore with size: 0~0.6mm and the recovery of heavy-medium in coal preparation industry. 

The half upstream tank (Series CTB) is applicable to rougher flotation and concentration of ore with size: 0~1mm.


Application for magnetic drum separator

Magnetic separator is used to separate magnetite, hematite, limonite, pyrrhotite, ilmenite smaller than 3 mm in wet way. It is also used to separate iron in coal, nonmetallic ore, construction industry, etc. 
The features for magnetic drum separator

1. The strength of magnetic field is large in the surface of tube;
2. Large wrap angle of magnetic system;
3. The strength of magnetic field is stability;
4. The transmission system is stable and reliable;

Components for magnetic drum separator

1. magnetic drum      2. tank body          3. support     4. feed box         
5. discharge box (ore concentrate box)   6. drive motor        7. motor reducer    8. control box, etc.
The magnetic drum is made of stainless steel (thickness: 3 mm) and covered with wear resistant rubber.

Technical parameters of magnetic roller separator

Our Services

1)  Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.

2)  Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export

3)  After-sales service: Offer considerate technical guidance in installation, debugging and operators training. We are available at any time if you need.

Packaging & Shipping

Package: FCL & LCL export standard container 20GP/40GP/40HQ.

•  FCL: main machinery gold shaking table in nude package and bulk in container, spare parts in wooden box or as your special requirement
•  LCL: machinery are packed in steel frame, base and deck are separately packed.

Shipping: by sea shipment, by air shipment or by courier express, it depends on you.

 

Payment Terms:

• T/T or L/C is preferable.
• T/T: 30% deposit and the balance before delivery
• we will take photos for your products when finished and show you before delivery. Also keep you informed for any updated information including shipping before you receive it, to let you rest assured

 Delivery time:  shipped in 15 days after payment


Company Information
Jiangxi Victor International Mining Equipment Co.,Ltd. is a large mineral processing manufacturer which is specialized in designing, producing, installing and debugging as well as providing processing line design and course training of mineral processing. Presently our company is a large manufacturer in China, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team. 

 

With excellent performance of our products and good after-sale service, many equipments are popular to aboard & domestic market such as flotation machine, classification machine, screening machine, especially gravity mining machine, which has a 32% market share in China. Meanwhile, we stick to international development strategies and continuously open up the international market, according to the market demands and the feature of our products. Now it's already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.

 

Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc.. 

 

We are expert especially at mining separating and lab mining plant, main products as below:

Gold trommel wash plant

Shaking table

Spiral chute separator

Centrifugal gold concentrator

Jig separator machines

Waste recycling machine

Grinding and mill crusher

Flotation cell machine

Magnetic separator

Laboratory mining plant



Contacts

 

   
  
   

Product Introduction for magnetic drum separator
Series CTB wet drum permanent magnetic separator is usually used for sorting the fine-grained strong magnetic minerals, or removing strong magnetic minerals from non-magnetic minerals. With a deep magnetic field, the machine can make a continuous row of ore feeding and discharge. It also has enough working clearance and high processing capabilities.



Working principle of magnetic drum separator

When the ore pulp folw into the magnetic field, the strong magnetic minerals are adsorbed on the surface of the drum. The weak magnetic and non-magnetic minerals are cast off and discharged, while the strong magnetic minerals on the surface of the drum rotate with the drum and will be brought out of magnetic field to complete the sorting operation.

The drum can be equipped with three kinds of tanks. That is downstream tank (Series CTS), upstream tank (Series CTN) and half upstream tank (Series CTB).

The downstream tank (Series CTS) is applicable to rougher flotation and concentration of ore with size: 0~10mm.

The upstream tank (Series CTN) is applicable to rougher flotation and concentration of ore with size: 0~0.6mm and the recovery of heavy-medium in coal preparation industry. 

The half upstream tank (Series CTB) is applicable to rougher flotation and concentration of ore with size: 0~1mm.


Application for magnetic drum separator

Magnetic separator is used to separate magnetite, hematite, limonite, pyrrhotite, ilmenite smaller than 3 mm in wet way. It is also used to separate iron in coal, nonmetallic ore, construction industry, etc. 
The features for magnetic drum separator

1. The strength of magnetic field is large in the surface of tube;
2. Large wrap angle of magnetic system;
3. The strength of magnetic field is stability;
4. The transmission system is stable and reliable;

Components for magnetic drum separator

1. magnetic drum      2. tank body          3. support     4. feed box         
5. discharge box (ore concentrate box)   6. drive motor        7. motor reducer    8. control box, etc.
The magnetic drum is made of stainless steel (thickness: 3 mm) and covered with wear resistant rubber.

Technical parameters of magnetic roller separator

Our Services

1)  Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.

2)  Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export

3)  After-sales service: Offer considerate technical guidance in installation, debugging and operators training. We are available at any time if you need.

Packaging & Shipping

Package: FCL & LCL export standard container 20GP/40GP/40HQ.

•  FCL: main machinery gold shaking table in nude package and bulk in container, spare parts in wooden box or as your special requirement
•  LCL: machinery are packed in steel frame, base and deck are separately packed.

Shipping: by sea shipment, by air shipment or by courier express, it depends on you.

 

Payment Terms:

• T/T or L/C is preferable.
• T/T: 30% deposit and the balance before delivery
• we will take photos for your products when finished and show you before delivery. Also keep you informed for any updated information including shipping before you receive it, to let you rest assured

 Delivery time:  shipped in 15 days after payment


Company Information
Jiangxi Victor International Mining Equipment Co.,Ltd. is a large mineral processing manufacturer which is specialized in designing, producing, installing and debugging as well as providing processing line design and course training of mineral processing. Presently our company is a large manufacturer in China, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team. 

 

With excellent performance of our products and good after-sale service, many equipments are popular to aboard & domestic market such as flotation machine, classification machine, screening machine, especially gravity mining machine, which has a 32% market share in China. Meanwhile, we stick to international development strategies and continuously open up the international market, according to the market demands and the feature of our products. Now it's already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.

 

Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc.. 

 

We are expert especially at mining separating and lab mining plant, main products as below:

Gold trommel wash plant

Shaking table

Spiral chute separator

Centrifugal gold concentrator

Jig separator machines

Waste recycling machine

Grinding and mill crusher

Flotation cell machine

Magnetic separator

Laboratory mining plant



Contacts

 

   
  
   

AAC Block&Panel Autoclave

Aac Autoclave,Concrete Block Autoclave,Concrete Brick Autoclave,Autoclaved Aerated Concrete Brick Autoclave

JIANGSU OLYMSPAN THERMAL ENERGY EQUIPMENT CO.,LTD , https://www.compositesautoclave.com