Iacs Approved Marine Anchor Windlass

Posted on

Marine Hydraulic Windlass Mooring Winch 1. Certification: CCS, EC, BC, ABS, DNV, BV, and more. 2. Fast delivery time available. Marine Hydraulic Windlass Mooring Winch 1. Rated pull capacity ranges from 5 to 2000 kN. 2. Rated speed is over 4 to 12 m/min. 3. Drum capacity: ø8×100 to ø100×250 meters. 4. Motor power: 5.5 to 270 kW. **Related Marine Equipment**
Iacs Approved Marine Anchor Windlass
 		 Anchor Winch / Anchor Windlass
  • Loading capacity: 10 ~ 1000 kN;
  • Chain diameter: Customized;
  • Working speed: 0 ~ 15 m/min;
     
  • Driven type: Electric, hydraulic, diesel;
Anchor Mooring Winch
  • Loading capacity: 50 ~ 1000 kN;
  • Wire rope capacity: Customized;
  • Working speed: 8 ~ 12 m/min;
     
  • Driven type: Electric, hydraulic, diesel;
 Iacs Approved Marine Anchor Windlass
 
Iacs Approved Marine Anchor Windlass
 		 Mooring Winch
  • Loading capacity: 10 ~ 1000 kN;
  • Wire rope capacity: Customized;
  • Working speed: Customized;
     
  • Driven type: Electric, hydraulic, diesel;
 
Towing Winch / Tugger Winch
  • Loading capacity: 10 ~ 3000 kN;
  • Wire rope capacity: 0 ~ 3000m;
  • Working speed: 0 ~ 30 m/min;
     
  • Driven type: Electric, hydraulic, diesel;
 		 Iacs Approved Marine Anchor Windlass
 
Iacs Approved Marine Anchor Windlass
 		 Vertical Capstan Windlass
  • Loading capacity: 5 ~ 350 kN;
  • Wire rope capacity: Customized;
  • Working speed: Customized;
     
  • Driven type: Electric, hydraulic;
Horizontal Capstan Windlass
  • Loading capacity: 5 ~ 350 kN;
  • Wire rope capacity: Customized;
  • Working speed: Customized;
     
  • Driven type: Electric, hydraulic;
 Iacs Approved Marine Anchor Windlass
 

Dibenzyltoluene Hot Oil 690

Armcoltherm® 690 (-30℃~350℃) Heat Transfer Fluid
Armcoltherm® 690 is dibenzyltoluene heat transfer oil, it is ideally suited for a variety of typical uses, including the chemical and plastic industries.
This high performance heat transfer fluid is specifically engineered for operation within enclosed, unpressurized systems, providing exceptional functionality to keep your equipment operating at peak efficiency and optimal output levels.
Armcoltherm® 690, its boiling point is higher than the upper limit of the operating temperature. This heat transfer oil is particularly well-suited for industries such as polyester chemical fiber, spandex, petrochemicals, engineering plastics, pesticides/pharmaceutical intermediates, silicones, refrigerants, coal chemicals, resins, fine chemicals, and more.

Dibenzyltoluene, hot oil,therminol oil 55, liquid phase heating system,heat transfer agent, Armcoltherm 690

Heat Transfer Fluids , https://www.armcoltherm.com