Temperature: -20C~120C
Output: 4~20mA, Pulse(Standard), RS485/RS232
Accuracy: +/-0.5% of full scale
Low cost, High performance
Measure liquid or gas
| Turbine flowmeter |
 |
 |
 |
 |
 |
Description |
|||
|
Type |
A |
 |
 |
 |
 |
Flow sensor pulse output three-wire system,  +12V power supply; |
|||
|
B |
 |
 |
 |
 |
Local display,  powered by 3.6V battery; |
||||
|
C |
 |
 |
 |
 |
Local display with  4~20mA or pulse  output,  powered by 24V; |
||||
|
D |
 |
 |
 |
 |
Flow transmitter 4~20mA output,  powered by , 24V; |
||||
|
Nominal drift diameter Note: standard flow as user manal |
4 |
 |
 |
 |
Normal flow range m3/h |
0.04~0.25 |
Extended flow range m3/h |
0.04~0.4 |
|
|
6 |
 |
 |
 |
0.1~0.6 |
0.06~0.6 |
||||
|
10 |
 |
 |
 |
0.2~1.2 |
0.15~1.5 |
||||
|
15 |
 |
 |
 |
0.6~6 |
0.4~8 |
||||
|
20 |
 |
 |
 |
0.8~8 |
0.45~9 |
||||
|
25 |
 |
 |
 |
1~10 |
0.5~10 |
||||
|
32 |
 |
 |
 |
1.5~15 |
0.75~15 |
||||
|
40 |
 |
 |
 |
2~20 |
1~20 |
||||
|
50 |
 |
 |
 |
4~40 |
2~40 |
||||
|
65 |
 |
 |
 |
7~70 |
3.5~70 |
||||
|
80 |
 |
 |
 |
10~100 |
5~100 |
||||
|
100 |
 |
 |
 |
20~200 |
10~200 |
||||
|
125 |
 |
 |
 |
25~250 |
12.5~250 |
||||
|
150 |
 |
 |
 |
30~300 |
15~300 |
||||
|
200 |
 |
 |
 |
80~800 |
40~800 |
||||
|
Explosion protection |
 |
 |
 |
Not marked,  without explosion protection |
|||||
|
B |
 |
 |
Explosion protection type |
||||||
|
Precision class |
A |
 |
Precision:  Class 0.5 |
||||||
|
B |
 |
Precision:  Class 1.0 |
|||||||
|
Turbine type |
A |
Normal flow range |
|||||||
|
B |
Extended flow range |
||||||||
| Note: Sensors with pipe diameter of DN4~DN40 are of thread connections with maximum operating pressure of 6.3Mpa. Sensors with pipe diameter of DN50~DN200 are of flange connections with maximum operating pressure of 2.5Mpa. Sensors with pipe diameter of DN4~DN10 are provided with front and rear straight pipe sections and filters.   Please specify when placing an order if flange connections are required for pipe diameter of DN15~DN40. Please specify when placing an order for high pressure type and special requirements.  | |||||||||
LINA Extrusion Pelletizer
LINA extrusion pelletizer is in the leading level in domestic industry, LINA produces different types granulation extruder such as hot-cutting and air-cooling mode, under-water pelletizing mode, water strand extrusion pelletizing mode and water ring extrusion pelletizing mode to meet the needs of different material.
Material feeding is an important process of the whole granulation process. To achieve effective and efficient material feeding process, LINA adopts twin-taper and twin-arm feeding methods to meet the needs of all kinds of materials.
LINA Twin-Taper Granulation Machine
LINA twin taper granulation machine, it is also called double-cone pelletizing machine, which adopts forced feeding by the two tapers. In order to achieve the continuous and fully automatic process by forced feeding the mixed metal lump, LINA double cone pelletizer reduces the crushing links which exists in traditional granulation of metal powder. LINA twin taper granulator is specialized for the pelletizing of high-hardness, strength and wear resistance material, including stainless-steel powder, iron powder, magnetic powder, zirconium oxide and ceramic powder.
LINA Rubber & Plastic Pelletizing Production Line
LINA rubber & plastic granulation production line is applied for a variety of rubber masterbatch, rubber additives, chemicals auxiliaries and other masterbatch granulation. The whole process is Dispersion Kneader → Automatic hoist → Forced dual-arms feeder → Single screw extruding granulator → Dropping type-air cooling die face hot cutting granulator →Level 1 cooling separator → Level 2 cooling separator → Level 3 cooling separator →Taiwan Transparent vibration distribution sieve → Storage bucket.
Advantages of LINA Granulation Extrusion Line (Main techniques and drawings are from Taiwan, Japan and so on.)
1. The unit has the whole unit process chain, sound and light failure alarm and fast lock fault point and other control functions. All parts that are in contact with the material are made of stainless steel.
2. High accuracy of temperature control system to ensure the temperature sensitivity of the material.
3. It adopts the drop type separating method after cutting process, to avoid Particle agglomeration and ensure particle cooling.
4. Feeding system of the pressing machine adopts heater and reversing device to solve problem of power outage, material crash and cleaning.
5. Especially, the barrel and die head adopts advanced foreign techniques to ensure and control the dangerous occurred when the pressure is uncontrollable. The honeycomb filter plate is easy to clean and quickly change the mesh and the die head t easy to leak.
6. The hoist adopts automatic return technology to ensure the working efficiency.
7. The technological combination of dual-pull forced feeder and single screw not only meet the high requirement of secondary continuous mixing, but also solve the problem of time and power consuming of traditional working process.
Specifications of LINA Extrusion Pelletizing Line
|
Name |
Mode |
Capacity of Kneader |
Screw length to diameter ratio |
Screw diameter |
Dimension |
|
LINA Extrusion Pelletizing Line |
LN-10/70 |
10L |
12:01 |
70mm |
2200*1000*1150 |
|
LN-10/75 |
10L |
12:01 |
75mm |
2650*1100*1250 |
|
|
LN-35/100 |
35L |
12:01 |
100mm |
3800*1090*1690 |
|
|
LN-55/120 |
55L |
12:01 |
120mm |
3800*1090*1690 |
|
|
LN-75/135 |
75L |
12:01 |
135mm |
3850*2350*3280 |
|
|
LN-110/150 |
110L |
12:01 |
150mm |
5100*2000*1500 |
|
|
LN-110/165 |
110L |
12:01 |
165mm |
5100*2000*1500 |
Extrusion Pelletizer
Plastic Pelletizer,Plastic Granulation Line,Plastic Extruder,Plastic Extrusion Pelletizer
LINA Machinery Industrial Co.,Ltd , https://www.linakneader.com