Flake Ice Maker with High Quality

Flake Ice Machine Features:

Continuous and rapid ice making, automatic control process.
 
The unit structure is compact and can be placed above the ice room, covering small area.
 
Photoelectric switch automatically measures the ice room capacity.
 
Evaporators, ice scrapers and ice rooms are all made of stainless steel.
 
Flake ice is a kind of irregular squamous ice, ranging from 1.5-2.5mm wide.
 
Temperature of flake ice may reach -8 DEG C below, good for storage and transport.
 
It is dry and loose and can be directly used to cool and stir cooled objects.
 
Large contact area with fresh goods, rapid cooling speed.
 
Flake ice has no sharp edges so it can't damage the surface of cold preservation objects.



 

 

 
Quick Details
 
Refrigerants R22
Refrigerants R404as
Daily outputkg/24h:10,000kh
Ice Thickness:1.8-2.5mm
flake ice temperature: -8degree 
Power supply:3P/220V/60HZ/3P/380V/50HZ
 
 
Advantages of flake ice produced by flake ice maker machine:
 
1. Large contact area: As its flat and thin shape, it has got the largest contact area among all types of ice. The larger its contact area is, the faster it cools other stuff. In comparison with 1 ton of cube ice, 1 ton of flake ice has 1799 sqm of contact area while 1 ton of cube ice only has 1383 sqm, therefore the flake ice has got much better cooling effects than cube ice.
 
2. Low cost of producing
 
The producing of flake ice is very economical, it only requires 1.3RT refrigerating effect to make 1 ton of ice from16C water.
 
3. Perfect in food cooling
 
Flake ice is type of dry and crispy ice, it hardly forms any shape edges, in food cooling process, this nature has made it the best material for cooling, it can reduce the possibility of damage to food to the lowest rate.
 
4.Thoroughly mixing
 
Flake ice can become water quickly through the rapid heat exchanging with products, and also supply the moisture for products to be cooled.
 
Applications of Focusun industrial flake ice making machine:

Focusun flake ice machine are widely applied in processing & preservation of aquatic products and fruit & vegetable, poultry slaughter, meat processing, machine & chemical projects, textile printing, deep-sea fishing, laboratory refrigeration and concrete pouring, etc.
 
Please feel free to contact me! 

Standard power supply for large capacity flake ice machine is 380V/3P/50Hz and it can be customized.

Configuration: one or more sets of Bitzer semi-hermetic screw compressor with economizer; water cooling way (air cooling or evaporative cooling is also suitable for special condition.)

Installment: all equipment except the cooling tower are installed on one steel frame so it is very convenient to install on spot and can be put into use immediately after hooking it up to the water resource and electricity circuit. The cooling method of the condenser can be customized.

Application: industrial concrete mixing project, artificial skiing ground, etc.

Features
Low investment, energy saving and low operational cost
Environmentally friendly and highly efficient
Full automatic design, accurate design, low fault rate and minimum maintainance cost.
The environment-friendly design decreases energy waste and greenhouse gas emission(A21E).
Excellent sales service and strong technical support
Large capacity flake ice machine technical parameter

Dry Concrete Batching Plant is one special kind of Concrete Mixing Plant , which don't need Concrete Mixer . the aggregate and cements are directly unloaded into concrete mixer truck after weighing . they will be mixed in the concrete mixer truck during the transport . Dry Concrete Batching Plant is popular these years as it it simple and the cost is lower than wet concrete mix plant . 

Dry Concrete Mixing Plant

Dry Concrete Plant,Dry Concrete Batching Plant,Dry Concrete Mixing Plant

SHANDONG SHINE MACHINERY CO.,LTD , https://www.shinebatchplant.com